Airport and hangar sector

Airport Hangar Doors for Large Aircraft Openings

Airport hangar doors should be selected from the clear opening, aircraft movement envelope, design wind load, structure and available leaf travel. Send plan, elevation and structural information for an early configuration review.

Specify from the building and aircraft

Match airport hangar doors to opening geometry and wind

Large doors depend on the building almost as much as the door system. The preferred movement and leaf arrangement should be checked before the structure and surrounding works are finalized.

01

Clear aircraft envelope

Required width, height, tail clearance, wing movement and apron approach.

02

Design wind load

Local wind data, building exposure, operating limit and closed-door requirement.

03

Structural interface

Head support, side columns, foundations, roof loads and allowable deflection.

04

Door movement

Side travel, folding zone, stacking space, floor tracks and operating sequence.

One building-door coordination process

Confirm the movement concept before detailed design

Early coordination reduces conflicts between door loads, structural steel, foundations, apron clearances and service routes.

01Aircraft envelopeClearance, approach and operational opening
02Site windDesign values and operating conditions
03Movement conceptLift, slide, fold or corner travel
04Building interfaceStructure, foundations and service clearances
05Controls & safetySequence, warning and emergency operation

Quick selection reference

Start with clear opening, wind and available travel space

Use this comparison to select a concept for engineering review rather than choosing only from the opening size.

Hangar conditionMain priorityRecommended solutionInformation to confirm
Very wide and tall openingLarge flexible lifting systemFabric Mega DoorOpening, structure, wind, fabric and lifting zones
Wide facade with side storageHorizontal sliding leavesSliding Hangar DoorTravel, foundations, track, leaf layout and wind
Restricted straight side spaceLeaves travel around a cornerRound-the-Corner Hangar DoorPlan, corner path, track, parking and drive
Clear facade with exterior spaceUpward folding movementVertical Bi-Fold DoorHeader, clearance, wind, panels and lifting
Side stacking large openingFolding panels and compact storageIndustrial Folding DoorPanel count, pocket, floor, wind and operation
Support or maintenance bayInsulated vertical openingIndustrial Sectional DoorTrack, panels, glazing, sealing and exposure
Airport

From concept drawings to technical quotation

What YUOU needs to review a hangar door project

The most useful enquiry package combines aircraft clearance, building geometry, structural information and site wind data.

  • Plan, elevation, sections and required clear opening
  • Aircraft type, movement envelope and apron conditions
  • Design wind load and required operating wind limit
  • Structural steel, foundations and available travel space
  • Power, controls, safety sequence and delivery destination

Questions before specification

Airport hangar door planning FAQ

What drawings are needed for an initial hangar door quotation?

Send plans, elevations and sections showing the clear opening, side space, header, structure, floor, apron and any door travel restrictions.

How should the door type be selected for a large opening?

Compare opening size, design wind, structural support and available movement space. Different systems place loads and store leaves in very different ways.

Can a concept be reviewed before the building structure is finalized?

Yes. Early review is recommended because the door movement, support loads, foundations and clearances can influence the building design.

What site data is important besides opening dimensions?

Provide wind criteria, aircraft clearance, operating frequency, power, controls, installation access, transport restrictions and required documentation.

Request a project recommendation

Send your hangar drawings, opening size and wind criteria

Include the aircraft envelope, building structure, available movement space, design wind load, controls and destination. We will prepare a concept-based quotation.

Request a Quote for Your Project

Share the products, approximate sizes and quantities you need. We will review your requirements and confirm quotation details with you.

Not sure about the specifications? Send the details you have.

Your Quote Request

One product or a mixed order - share your requirements below.

PDF, JPG, PNG or XLSX. Up to 3 files, 5 MB each.

Get A Free Quote

Fill out the form below, and we will be in touch shortly.

Your Quote Request

One product or a mixed order - share your requirements below.

PDF, JPG, PNG or XLSX. Up to 3 files, 5 MB each.